166 Engine parts for Land Rover from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
PLUG - OIL DRAIN
€13.99
New5 in stockincl. VAT
C2Z13434 - Jaguar Hose - Vacuum. Engine Mounting-front
€108.73
NewLast oneincl. VAT
LR000645 is a flanged hex bolt with an M14 x 150mm specification. Fitted to the crankshaft, it secures the crankshaft pulley on 2.2 CRDI diesel engines and should be inspected for thread or head damage whenever the pulley is removed.
€9.90
New8 in stockincl. VAT
AAU9902 is a lower diesel fuel filter seal. Fitted to the lower seal on diesel fuel filters and sedimentors, it provides the sealing element at the base of the filter assembly.
€3.99
New19 in stockincl. VAT
WDN500110 is a central Exhaust Gas Temperature Sensor. Fitted to the exhaust system and commonly referred to as an EGTS, this sensor monitors exhaust gas temperature on 2.7 TDV6 and 3.0D V6 diesel engines, typically where a diesel particulate filter is fitted.
€140.70
NewLast oneincl. VAT
LR091743 is a timing chain tensioner fitted to the timing gear of 2.0 L Ingenium petrol engines. It applies a controlled preload to the timing chain to limit slack caused by normal wear, thermal expansion and valve-train loading, which helps reduce timing deviation and audible chain noise. The tensioner mounts at the timing gear assembly and works with the chain guide surfaces to keep the chain position stable across the camshaft and crankshaft sprockets; inspect the timing system where abnormal noise or timing symptoms are present, as worn tensioners or guides will require replacement to restore correct chain behaviour.
€127.00
NewLast oneincl. VAT
CAMSHAFT COVER CENTRE SEAL
€7.99
New11 in stockincl. VAT
LR004786 is a timing belt tensioner for the Cologne 4.0 V6 EFI engine. Fitted at the front timing gear, the tensioner applies and regulates tension to the timing belt to keep camshaft and crankshaft positions synchronised and to prevent belt slip or tooth skipping. It compensates for belt stretch and material wear, helping to reduce belt vibration and noise while maintaining steady timing during engine speed changes. During timing belt replacement the tensioner is commonly replaced to restore correct pre-load; inspect the unit for smooth movement and for absence of seizure or noisy operation to identify wear before it affects engine timing.
€115.50
NewLast oneincl. VAT
Water Inlet Pipe for Land-Rover
€121.80
NewLast oneincl. VAT
LR108955 is an exhaust pressure sensor fitted to the low-pressure EGR system on 2.0L diesel engines. It measures exhaust backpressure in the EGR return line and converts that pressure into an electrical signal for the engine control unit to control EGR flow and monitor system performance. The tube connection included with the sensor positions the sensing port away from high-temperature components and links the sensor to the EGR return pipework to maintain correct pressure sampling for the control system.
€162.00
NewLast oneincl. VAT
FS106206 is an M6 x 20mm flange-head screw. Fitted where a secure flange-headed fastener is required, this screw fastens components on the Land Rover models listed below.
€0.99
New25 in stockincl. VAT
Balance shaft. 2.0 AJ21D4 Diesel
€189.50
NewLast oneincl. VAT
K3dparts Pro Locator
