166 Engine parts for Land Rover from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
NRC6097 is a fuel tank mounting bracket that secures the vehicle's fuel tank to the chassis. It is used on Defender and Range Rover Classic models and forms part of the fuel tank pump and mountings assembly.
€7.99
New4 in stockincl. VAT
Oil cooler gasket
€34.10
NewLast oneincl. VAT
LR106277 is a flanged hex nut used to secure mating threaded fasteners in Land Rover assemblies. The integral flange provides a larger bearing surface to help distribute clamping load and resist loosening, reducing the need for a separate washer where a flanged specification is required.
€1.68
New10 in stockincl. VAT
LR073725 is an M8 flanged hex nut fitted to turbocharger and accessory drive fasteners on 2.0 L Ingenium diesel engines. It is used to retain those fasteners and should be replaced with the correct part when refitting the turbocharger or related accessory components.
€2.30
New5 in stockincl. VAT
LR022300 is a glow plug for the 2.2L diesel engine. Fitted into the combustion chamber, it provides heat during cold-start conditions to aid ignition and improve starting reliability on 2.2L diesel engines.
€39.78
New4 in stockincl. VAT
FS108206 is an M8 x 20mm flange-head screw, also referred to as a flange bolt. Fitted where a flange-head fastener is specified, this screw secures components on the Land Rover models listed below.
€1.98
New17 in stockincl. VAT
Jaguar starter motor, Anti Roll Bar-Front bolt, Clutch Housing, bolt
€3.15
New10 in stockincl. VAT
ERR2532 is a rear crankshaft oil seal fitted to the rear of the crankshaft on 5-bearing 4-cylinder petrol and diesel engines up to and including the 200Tdi. The seal's purpose is to retain engine oil at the crankshaft rear sealing surface and prevent external leakage when fitted to the correct engine variants.
€39.64
NewLast oneincl. VAT
LR019118 is a leak-off pipe O-ring. Fitted to the fuel injector leak-off pipe, it seals the injector return path on applicable 2.2 Puma, 2.7 TDV6 and 3.6 TDV8 diesel engines.
€3.20
New11 in stockincl. VAT
AAU9903 is the upper sealing O-ring used on diesel fuel filter/sedimentor assemblies. Fitted at the filter head, it provides the upper seal and prevents fuel leaking from the top of the filter housing.
€3.55
New9 in stockincl. VAT
Water Inlet Tube Upper Bolt
€49.78
NewLast oneincl. VAT
1372721 is an M8 x 38mm hex-headed bolt. Fitted to turbocharger brackets, it secures components to the bracket to maintain correct assembly and alignment.
€11.99
New6 in stockincl. VAT
K3dparts Pro Locator
