108 Engine parts for Land Rover from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
LR033197 is an M14 flanged nut used to secure engine mounting assemblies on Range Rover, Range Rover Sport and Discovery 5 models. It is specified for use on the engine mounting fittings listed below; inspect the threads and replace the nut if damaged or corroded before refitting.
€2.89
New5 in stockincl. VAT
500447 is a Rubber Bush - Fuel Tank. Fitted as the rubber mounting that secures the fuel tank to its mounting brackets, it provides a resilient interface that helps isolate vibration between the fuel tank and the vehicle body/chassis.
€2.55
New4 in stockincl. VAT
LR082314 is an EGR Manifold Gasket. Fitted to the exhaust gas recirculation (EGR) manifold on 2.0 L Ingenium diesel engines, it seals the mating faces to prevent exhaust gas and soot leaks and help maintain correct EGR system performance. When replacing this gasket, ensure the mating surfaces are clean and correctly aligned to achieve a gas-tight seal.
€10.99
NewLast oneincl. VAT
LR073734 is an EGR cooler gasket that seals the joint between the EGR cooler and the EGR valve on 2.0 L Ingenium diesel engines. This part is specified for the low-pressure EGR systems fitted to the compatible Range Rover Evoque and Discovery Sport models listed below.
€7.99
NewLast oneincl. VAT
is an exhaust gasket used to seal flanged joints in the exhaust system. It is fitted to 2.7 TDV6, 3.0D V6, 2.0 TIVCT, 2.2D and 4.4D engines on the Land Rover and Range Rover models listed below, preventing leaks where manifolds and exhaust pipes join.
€9.90
NewLast oneincl. VAT
STC1739 is an injector pipe clip used to secure the rigid high-pressure injector supply pipes fitted to 300Tdi engines. This clip holds the supply pipes in place to maintain correct routing and secure attachment to the injectors.
€9.85
New2 in stockincl. VAT
LR075627 is an Exhaust Manifold to EGR Tube Gasket. Fitted within the Exhaust Gas Recirculation (EGR) system, this gasket seals the junction between the EGR tube and the exhaust manifold on compatible 3.0 V6 diesel engines, preventing exhaust gas leakage at the flange and helping to maintain correct EGR function.
€19.95
NewLast oneincl. VAT
Jaguar bolt camshaft m12x35mm
€11.70
New3 in stockincl. VAT
Valve Spring Retaining Cap.
€18.90
NewLast oneincl. VAT
LR004447 is an oil cooler and filter housing seal fitted to the oil cooler and filter housing on 2.4L Duratorq-TDCi Puma diesel engines. It provides a pressure-tight seal at the joint between the oil cooler and the filter housing to prevent oil leakage and should be inspected whenever the cooler or housing is removed.
€13.80
NewLast oneincl. VAT
FB110151L is a flange-head bolt, size M10 x 75mm. Fitted to secure components such as air-conditioning compressors, coolant pumps and alternator mountings, this bolt gives a larger bearing surface to help distribute clamp load and resist loosening during normal operation.
€3.90
New4 in stockincl. VAT
The part number LYG101430L a bolt. Specifically designed for the turbo system in Land Rover.
€4.84
New2 in stockincl. VAT
K3dparts Pro Locator
