166 Engine parts for Land Rover from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
LR113358 is an exhaust manifold stud. It is supplied in M8 x 16mm and M8 x 8mm configurations and is used to secure the exhaust manifold to the cylinder head on the specified 3.0 V6 and 4.4 V8 diesel engines.
€4.89
New6 in stockincl. VAT
1316028 is an M6 x 16mm flanged-head bolt. Fitted to the exhaust gas recirculation (EGR) valve and exhaust manifold assemblies, it secures those components in position.
€1.23
New23 in stockincl. VAT
LR079272 is a retaining ring used within the fuel tank and related assemblies. Fitted in the fuel system, it secures and locates components to maintain correct position and ensure assembly integrity on specified Range Rover and Range Rover Sport models.
€83.40
NewLast oneincl. VAT
LR005365 is an Oil Pressure Switch. Fitted into the oil cooler and filter assembly on 2.2L DW12 diesel engines, the switch operates within that assembly to monitor oil pressure and interface with the vehicle's oil monitoring circuits.
€33.10
NewLast oneincl. VAT
FS108161L is a flange-head screw M8 x 16mm. It is used to secure components such as camshaft and oil sump assemblies on Tdi engines, and for general body and chassis fixings where a flange-head M8 screw is required.
€1.99
New9 in stockincl. VAT
LZN100390L is a cylinder head hose insert. Fitted into the cylinder head, it provides a secure seating to accept a hose on 2.5 KV6 Freelander 1 petrol engines.
€25.10
New2 in stockincl. VAT
LR023967 is a banjo bolt that secures the turbocharger oil feed fitting and provides the oil passage that supplies lubrication to the turbocharger. It is fitted to the turbocharger oil feed on 3.0 V6 diesel and 4.4 V8 diesel engines used across Discovery and Range Rover models.
€19.10
New4 in stockincl. VAT
LR004469 is a high-pressure rigid fuel pipe that connects the fuel rail to injector number 4 on 2.4 Puma diesel engines. Fitted to the outermost right-hand injector, this pipe forms part of the HPCR (High Pressure Common Rail) fuel injector pipework and provides a sealed, rigid route for high-pressure diesel between the rail and the injector.
€56.08
NewLast oneincl. VAT
Jaguar Vacuum Pump tube. Diesel.
€61.95
NewLast oneincl. VAT
LR010517 is an M10 exhaust stud supplied in two lengths (M10 x 14mm and M10 x 26mm). Fitted to the exhaust assembly on Defender models, this stud is used where a keyed stud is required to fasten exhaust flanges and manifolds and to maintain a secure, gas-tight joint.
€7.10
New7 in stockincl. VAT
Bracket for the EGR system
€59.75
NewLast oneincl. VAT
Jaguar Induction manifold gasket
€55.10
NewLast oneincl. VAT
K3dparts Pro Locator
