Land Rover is well represented in our warehouse. Check compatibility on each product page before ordering.
Suggested price:
€7.42
New
Rivet used to secure body and chassis trim components on applicable Land Rover models. It is fitted as a factory fastening for trim and chassis locations; inspect the rivet when panels are removed and replace any that are damaged or deformed to ensure a secure refit.
Suggested price:
€8.48
New
Suggested price:
€7.42
New
Hex-headed bolt used to fasten components on front axle cases, transmission mountings and rear cross members across multiple Land Rover models. It provides the clamping required to secure these structural and drivetrain assemblies; when fitting, ensure mating faces and threads are clean and the correct fastener specification and torque from the vehicle repair manual are used. Inspect the bolt for corrosion, thread damage or distortion and replace if any defects are found.
Suggested price:
€8.48
New
Fuel pressure regulator O-ring fitted to the fuel pressure regulator on 2.0 TD4 and 3.0 TD6 engines. It is the specified Land Rover part for the fuel regulator seal used on Freelander 1 and Range Rover L322 applications.
Suggested price:
€9.54
New
O-ring for air conditioning compressor ports. Fitted to the air conditioning compressor ports to provide a seal at the compressor connections; inspect the O-ring for hardening, nicks or deformation whenever the system is opened or during air conditioning servicing.
Suggested price:
€10.60
New
Throttle body to inlet manifold gasket for 4.4D V8 engines. Fitted between the throttle body and the inlet manifold on 4.4L DOHC DITC V8 diesel engines, this gasket seals the joint to prevent intake air leaks that can affect running quality and trigger diagnostic fault codes.
Suggested price:
€10.60
New
Suggested price:
€7.42
New
FRC2883 is a 0.003 inch swivel pin housing shim. Fitted to the front axle swivel pin housing on applicable models, this shim is the correct thickness specified for use in the swivel pin housing assembly.
Suggested price:
€10.60
New
rivet 8x 4-5. Fitted to retain lightweight panels and trim components, this Rivet secures panels in place to help prevent movement and rattles during normal use. It is used across multiple Land Rover models for trim and panel retention and should be inspected when panels are removed for service or repair.
Suggested price:
€8.48
New
K3dparts Pro Locator
