Land Rover is well represented in our warehouse. Check compatibility on each product page before ordering.
LR032289 is an exhaust pipe gasket. Fitted to the front exhaust system on 4.4L V8 diesel models, it seals the joint between adjacent exhaust pipe sections to prevent exhaust gas leaks. The gasket should be inspected whenever the front exhaust system is accessed and replaced if damaged to maintain a correct seal.
Suggested price:
€12.72
New
LR096556 is a bolt used to fasten components within the rear cross member and stabilizer bar assemblies, the rear knuckle and suspension arms, and the front knuckle and hub assemblies. It is specified for use across the vehicle locations listed in the compatibility section and should be replaced if damaged or corroded to maintain correct suspension and hub integrity.
Suggested price:
€9.72
New
LDI100030 is a front camshaft oil seal for TD5 engines. Fitted to the front of the camshaft in the cylinder head, it prevents oil leakage from the cylinder head.
Suggested price:
€10.72
New
RUE000010 is a 51mm circlip. It locates and retains the wheel bearing within the hub knuckle, preventing axial movement on specified front and rear axle applications - confirm the correct axle and VIN before ordering.
Suggested price:
€12.72
New
LR067041 is a screw used to fasten components in the Exhaust Fluid Injection System. It secures diesel exhaust fluid injectors and their control units to their mounting points and should be inspected for thread integrity and corrosion whenever the injector assembly or control unit is serviced.
Suggested price:
€9.60
New
255467 is a flanged-head bolt for the swivel pin housing. Fitted to the swivel pin housing, this bolt provides the securing fastener that holds the swivel pin housing in place.
Suggested price:
€12.72
New
LR073719 is a bolt used on fuel injector clamps in the fuel system of 2.0L Ingenium diesel engines. It secures the injector clamp to the fuel rail and maintains correct injector position during operation; this item should be inspected for corrosion or damage whenever the fuel system is serviced.
Suggested price:
€12.72
New
FB116126 is an M16 flange-head bolt, 16 x 60mm. Fitted to towing equipment on Defender models, this flange-head bolt secures components such as drop plates and tow ball assemblies.
Suggested price:
€12.72
New
STRAP - TOOL KIT HOLD-DOWN.
Suggested price:
€12.72
New
LR002615 is an M18 x 1.5 tie rod adjusting nut. Fitted to the inner tie rod, this nut is used to adjust and then secure the track rod end so the steering toe alignment can be set and locked after adjustment.
Suggested price:
€10.60
New
LR024279 is an M5 x 12mm rivet nut. It forms a permanent M5 threaded insert in sheet metal to accept M5 fasteners, commonly used to secure headlamp levelling assemblies, fixings in the A-pillar and components on the rear door frame.
Suggested price:
€12.72
New
K3dparts Pro Locator
