83 Transmission & Drivetrain parts for Land Rover from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
TYP500050 is an M6 x 31.5mm Torx screw used to fasten the gearbox oil pan to ZF 6-speed automatic transmissions. It secures the oil pan to the transmission case on vehicles fitted with ZF 6HP26 and 6HP28 gearboxes. Check the fasteners for corrosion and tightness during transmission servicing.
€1.20
New10 in stockincl. VAT
LR050515 is a screw used to secure components within the front axle case. It is fitted to the front axle case assembly on the applicable models listed below.
€1.55
New4 in stockincl. VAT
SX108201L is an M8 x 20 high-tension hex-headed bolt. Fitted within clutch and flywheel assemblies, this high-tension bolt secures mating components where a durable, high-strength fastener is required.
€1.10
New8 in stockincl. VAT
UYP500110 is an M10 grub screw used on gear shafts and selector yokes. It secures selector components on LT230 high/low gear shafts and within the selector yoke area of R380 gearboxes, preventing axial movement of selector parts. Fitment is shown in the compatibility list below; inspect the screw and mating threads during gearbox assembly or service and replace if worn or damaged.
€4.72
New9 in stockincl. VAT
FRC3327 is a rod-to-fork retaining clip that secures the clutch slave cylinder push rod to the clutch fork. Fitted to LT77 and R380 manual gearboxes, this clip ensures the slave cylinder push rod remains engaged with the clutch fork so the clutch can be actuated reliably.
€17.20
New7 in stockincl. VAT
Bolt for the front axle.
€1.20
New6 in stockincl. VAT
Output shaft O ring
€3.75
New9 in stockincl. VAT
LR003158 is an inner circlip that retains the constant-velocity (CV) boot on driveshaft CV joints. It secures the boot in position on the driveshaft CV joint.
€2.99
New5 in stockincl. VAT
571161 is a Nylon Cap for the clutch release. Fitted to the clutch release lever on Series 2 and 3, Defender (to 2006), Discovery 1, Discovery 2 and Range Rover Classic, this cap provides a direct replacement for the original part used on those clutch release levers.
€5.88
New8 in stockincl. VAT
Bolt for the clutch.
€1.66
New17 in stockincl. VAT
LR0058800 is an output shaft oil seal for the MT82 manual transaxle. Fitted at the gearbox output shaft, it retains transmission lubricant and excludes contaminants from the transmission internals to help maintain reliable operation.
€56.10
NewLast oneincl. VAT
NY605042 is a 5/16 UNF nylon-insert lock nut. Fitted to the clutch master cylinder and associated hydraulic pipes, this lock nut secures the fittings and helps maintain a reliable, leak-free connection in the clutch hydraulic system.
€0.65
New11 in stockincl. VAT
K3dparts Pro Locator
