7 Transmission & Drivetrain / Propshaft / driveshaft parts for Land Rover from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
M12 x 65mm hex-headed bolt used to secure the rear propshaft coupling (doughnut) within the rear propshaft assembly. Fitted where the coupling joins the propshaft, it holds the doughnut in position to transfer drive torque; during servicing, check the bolt and mating threads for corrosion or damage and refit to the manufacturer's torque specification.
Suggested price:
€6.36
Hex-Headed Bolt M10 x 60mm - Defender, Discovery 1, Range Rover Classic
TZB500140 is an output shaft oil seal for the MT82 manual transmission. The seal sits at the transmission output shaft to retain gearbox lubricant and prevent contamination.
€12.72
Land Rover Part Number: 255467 - Flanged-Head Bolt - Swivel Pin Housing 255467 is a flanged-head bolt for the swivel pin housing. Fitted to the swivel pin housing, this bolt provides the securing fastener that holds the swivel pin housing in place.
€9.54
3/8 UNF nylon-insert lock nut specified for use on the propeller shafts. It is fitted to the front and rear propshaft flanges to secure the propshaft connection.
€8.48
An output shaft snap ring for the MT82 manual transmission. It secures and retains the output shaft components inside the MT82 gearbox to prevent axial movement.
€5.30
A 3/8 inch UNF propeller shaft bolt. Fitted to both front and rear propeller shafts, this bolt secures the shaft flanges together to retain the propshaft. Commonly referred to as a propshaft bolt, it uses a 3/8" UNF thread and is fitted to a range of Land Rover models
€10.07
K3dparts Pro Locator
