35 Transmission & Drivetrain / Propshaft / driveshaft parts for Land Rover from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
Bolt for the front axle.
€1.20
New6 in stockincl. VAT
Output shaft O ring
€3.75
New9 in stockincl. VAT
LR003158 is an inner circlip that retains the constant-velocity (CV) boot on driveshaft CV joints. It secures the boot in position on the driveshaft CV joint.
€2.99
New5 in stockincl. VAT
LR0058800 is an output shaft oil seal for the MT82 manual transaxle. Fitted at the gearbox output shaft, it retains transmission lubricant and excludes contaminants from the transmission internals to help maintain reliable operation.
€56.10
NewLast oneincl. VAT
571752 is a Drive Shaft End Gasket. Fitted at the axle drive flange, this gasket seals the drive shaft end to prevent lubricant leakage from the hub and helps maintain correct hub lubrication.
€1.99
New32 in stockincl. VAT
LR092703 is a bolt fitted to the front axle drive (propshaft) on Range Rover Velar (L560) models from 2017 onwards.
€1.99
New9 in stockincl. VAT
FRC4206 is an oil retainer gasket for the swivel housing. It seals the swivel housing oil retainer plate on Land Rover Defender models built between 1987 and 2006 and is used with axle codes 20L, 21L, 22L and 23L. The FRC4206 is an oil retainer gasket for the swivel housing. It seals the swivel housing oil retainer plate on Land Rover Defender models built between 1987 and 2006 and is used with axle codes 20L, 21L, 22L and 23L.
€7.80
New19 in stockincl. VAT
TDR500070 is a rear axle constant velocity (CV) joint boot kit. Fitted to the rear driveshaft, the boot seals the CV joint to keep out dirt and moisture while retaining the lubricant inside the joint.
€73.50
NewLast oneincl. VAT
LR137637 is a Special Washer for flange-type propshaft connections. Fitted at the rear-axle propshaft flange, it locates and spreads the clamp load to maintain correct flange seating.
€1.99
New11 in stockincl. VAT
TYC500160 is an output shaft oil seal retainer clip that secures seal TZB500140 onto the MT82 output shaft. It is fitted to the MT82 manual transaxle used on Land Rover Defender models built from 2007 to 2016 (from VIN 7A000001) and ensures the oil seal remains correctly located to help prevent gearbox oil leaks.
€4.78
NewLast oneincl. VAT
UYG500040 is an M10 double-hex bolt used to assemble and secure the swivel pin housing on Defender models built 2007 to 2016 from VIN 7A000001. Fitted as the primary fastener for the swivel pin housing assembly, it secures the housing to its mounting and must have clean, undamaged threads for correct installation; replace the bolt if corrosion or thread damage is present.
€3.30
New2 in stockincl. VAT
K3dparts Pro Locator
