94 Suspension & Steering parts for Jaguar from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
AIR SUSPENSION EXPANSION CHAMBER
€44.60
NewLast oneincl. VAT
LR122585 is a wheel hub bearing that locates the wheel hub and permits rotation of the wheel assembly for front and rear applications, left or right where specified. The bearing supports the wheel hub and carries radial and axial loads from the tyre contact patch into the suspension structure; it contains rolling elements that reduce friction between the rotating hub and the fixed stub axle or knuckle. Where a wheel speed sensor is integrated into the hub assembly, correct bearing fitment maintains sensor positioning and reliable wheel speed readings. Typical service indicators include noise, rough rotation or axial/play movement at the wheel; replacement restores correct hub running and wheel steering geometry. This part is supplied for left and right fitment on applicable Land Rover models and is used where a combined hub-bearing unit is required.
€85.50
NewLast oneincl. VAT
TAR100050 is an upper swivel pin kit for the front axle on ABS-equipped vehicles. Fitted as the upper pivot in the swivel housing, the kit includes an upper swivel pin, bearing, seal and shims; the bearing supports radial and axial loads at the pivot, the seal retains lubricant and excludes contaminants, and the shims allow correct bearing preload and axial clearance during installation. This kit is intended to replace worn or damaged swivel components that can produce steering play, uneven tyre wear or noise from the front suspension.
€89.25
NewLast oneincl. VAT
QYH500070 is a flanged nut fitted to the steering gear of the Range Rover L322 (2010-2012). It secures steering gear components in their correct position to maintain assembly integrity and safe operation.
€2.50
New15 in stockincl. VAT
RYP000071 is an M16 x 98mm bolt used to secure the lower rear hub knuckle bottom bush on the vehicle's rear suspension. It provides the clamping connection at the lower position of the rear hub knuckle assembly.
€6.79
New7 in stockincl. VAT
Jaguar F-Type spring. Used but good condítion.
€114.45
UsedLast oneincl. VAT
LR091086 is a steering column bolt used to secure the lower steering column assembly. It is fitted to the lower steering column on Range Rover Velar models and provides the required fastening for that assembly.
€1.78
New15 in stockincl. VAT
Jaguar Road spring kit
€367.50
NewLast oneincl. VAT
RYG501490 is a stepped hex-headed bolt used on anti-roll bar drop links. It is fitted to front anti-roll bar drop links on Defender models produced 2007-2016 (from VIN 7A000001) and is referenced for the rear anti-roll bar assembly.
€9.54
New2 in stockincl. VAT
RFD100000 is a staked wheel hub lock nut used to retain the hub bearing on Defender front and rear hubs. The nut has a thin top section which is deformed (staked) with a hammer and punch after the final torque is applied to lock the nut in place and prevent it from loosening in service.
€3.49
New2 in stockincl. VAT
K3dparts Pro Locator
