21 Suspension & Steering / Wheel bearings / hubs parts for Land Rover from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
TOF100040 is a 15.1mm hub spacer. Fitted within the front or rear hub assembly, this spacer locates the wheel bearing in the correct position and is identified by a green colour code.
€28.90
NewLast oneincl. VAT
TOF100060 is a 14.9mm hub spacer used with the front and rear wheel bearings. The spacer is identified by a white colour code and should be fitted as part of the hub/bearing assembly.
€24.90
NewLast oneincl. VAT
TOF100000 is a 15.5mm hub spacer used on wheel bearing assemblies. Fitted to both front and rear wheel bearing assemblies on Defender models, this spacer is identified by the purple colour code.
€22.10
NewLast oneincl. VAT
FS110141M is an M10 x 14mm flange-head screw. Fitted to fastening points on driveline assemblies in the listed Land Rover models, the flange head provides a larger bearing surface to spread load when securing components.
€4.62
New3 in stockincl. VAT
FTC3648 is a stub axle gasket. Fitted between the stub axle and the swivel pin housing or hub assembly, this gasket seals the joint on applicable Land Rover front and rear hubs.
€4.55
New9 in stockincl. VAT
Jaguar Wheel bearing.
€68.25
NewLast oneincl. VAT
LR122585 is a wheel hub bearing that locates the wheel hub and permits rotation of the wheel assembly for front and rear applications, left or right where specified. The bearing supports the wheel hub and carries radial and axial loads from the tyre contact patch into the suspension structure; it contains rolling elements that reduce friction between the rotating hub and the fixed stub axle or knuckle. Where a wheel speed sensor is integrated into the hub assembly, correct bearing fitment maintains sensor positioning and reliable wheel speed readings. Typical service indicators include noise, rough rotation or axial/play movement at the wheel; replacement restores correct hub running and wheel steering geometry. This part is supplied for left and right fitment on applicable Land Rover models and is used where a combined hub-bearing unit is required.
€85.50
NewLast oneincl. VAT
RYP000071 is an M16 x 98mm bolt used to secure the lower rear hub knuckle bottom bush on the vehicle's rear suspension. It provides the clamping connection at the lower position of the rear hub knuckle assembly.
€6.79
New7 in stockincl. VAT
RFD100000 is a staked wheel hub lock nut used to retain the hub bearing on Defender front and rear hubs. The nut has a thin top section which is deformed (staked) with a hammer and punch after the final torque is applied to lock the nut in place and prevent it from loosening in service.
€3.49
New2 in stockincl. VAT
K3dparts Pro Locator
