28 Suspension & Steering / Control arms & bushings parts for Land Rover from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
SX110301 is an M10 x 30mm high-tension screw used on Defender rear suspension assemblies. It secures suspension components such as bottom links and hubs and is specified for high-tension applications where a secure clamp is required.
€2.99
New4 in stockincl. VAT
RYH501090 is an M20 hex castle nut used to secure the rear top link assembly on Land Rover Defender models built 2007-2016. Fitted to the rear top link, the castellated head allows a locking method with compatible locking hardware to help maintain retention under suspension loads.
€4.99
New4 in stockincl. VAT
The part number RYP501110 a screw. Specifically designed for the Active Anti-Roll Bar system in Land Rover.
€7.45
New3 in stockincl. VAT
Land Rover part number LR037704 ( bolt) is a critical rear suspension arm that plays a vital role in maintaining the stability and handling
€17.95
NewLast oneincl. VAT
LR024149 is an M14 x 90mm Torx bolt used to secure the middle (mid) bush of the front wishbone. Fitted through the centre suspension bush, this bolt retains the wishbone to the subframe and transfers suspension loads into the chassis; ensure the mating threads and Torx recess are clean and undamaged before refitting and tighten to the manufacturer's torque specification.
€3.92
New2 in stockincl. VAT
LR090518 is a flanged nut used to secure mating fasteners in Land Rover assemblies. It is fitted where a nut with an integrated flange is required to retain components and resist loosening under normal service conditions.
€7.55
New3 in stockincl. VAT
NTC6781 is a front radius arm bush that locates the radius arm in the front suspension and reduces metal-to-metal contact at the mounting point. Fitted between the radius arm and the chassis, it helps protect mating components from wear.
€29.75
NewLast oneincl. VAT
LR097372 is a bolt used to secure structural components within the front crossmember and stabiliser bar assemblies. It is fitted in front suspension locations to retain and align crossmember and anti-roll bar components.
€9.10
New4 in stockincl. VAT
FY116056 is an M16 flanged nylon-insert lock nut. Fitted to the rear suspension, this flanged nylon-insert lock nut secures knuckles and suspension arms. Commonly referred to as a flanged nyloc nut or nylon-insert lock nut, it is supplied for use where a retained locking feature is required on M16 fastenings in the rear suspension assembly.
€1.59
New4 in stockincl. VAT
ANR3482 | Bolt - M12 - Flange Head - Front & Rear Suspension.
€13.50
New3 in stockincl. VAT
LR051046 is an M14 x 145mm bolt used to secure the front subframe to the vehicle structure. Fitted to the front subframe mounting points, this bolt provides the primary attachment between the subframe and the body on compatible Land Rover models.
€7.88
New6 in stockincl. VAT
LR124637 is an M14 diameter, 200mm long hex-headed bolt used to secure the front and rear crossmember and stabiliser bar assemblies. It provides the clamping required to locate these structural suspension components; inspect the bolt and mating threads for corrosion or damage and replace if found to ensure a secure fitment.
€17.90
New4 in stockincl. VAT
K3dparts Pro Locator
