60 Body & Exterior / Wings / doors / panels parts for Land Rover from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
BNP4556L is a window winder handle retainer clip that fits on the front door window winder shaft to secure the handle to the regulator spindle. It holds the winder handle in correct engagement with the regulator so the window can be operated manually without the handle sliding off. A worn or damaged clip will allow the handle to become loose or detach from the spindle and should be replaced to restore secure operation.
€9.99
New3 in stockincl. VAT
Floor Panel Plastic Lock Nut For Land Rover Defender 90,110,130.
€0.60
New6 in stockincl. VAT
RYG500910 is an M6 x 35mm hex-headed bolt supplied with a washer. Fitted where a combined M6 x 35mm bolt-and-washer fixing is specified, this fastener secures assemblies by clamping components together while the washer helps distribute load and protect the mating surface.
€1.10
New12 in stockincl. VAT
SE108251 is an M8 x 25mm pan-headed screw used to secure rear body lower mountings, rear end door hinges, stirrup step-side doors and the tailboard lower side hinged striker on Land Rover Defender models (1987-2006). It is a standard pan-head machine screw with an M8 thread and 25 mm length; inspect for corrosion, thread damage or distortion when servicing hinges or body mountings and replace any items that show wear.
€1.99
New4 in stockincl. VAT
LR043556 is a Rivet. Used as a rivet in Land Rover vehicles.
€1.10
New24 in stockincl. VAT
LR032995 is a left-hand front door lock cap with a lock hole, finished in black. Fitted to the exterior of the left-hand front door, the cap forms the visible trim around the lock barrel and provides the finished aperture for the lock barrel.
€23.90
NewLast oneincl. VAT
LR050752 is a bonnet release lever. Fitted as the interior release lever, it operates the release mechanism to unlatch the bonnet and allow access to the engine bay.
€14.30
NewLast oneincl. VAT
Exterior trim fixing part.
€12.10
NewLast oneincl. VAT
Cap - Door Locking Mechanism
€68.90
NewLast oneincl. VAT
BNP3996 is a 30mm sealing plug supplied as a pack of four. Fitted in various locations on body and door panels, it is used to seal access holes and openings in vehicle panels.
€2.88
New9 in stockincl. VAT
RYH500420 is an M6 nylon-insert lock nut with washer - hex. Fitted where vibration-resistant fastening is required across multiple Land Rover applications, the nylon insert grips the mating thread to help prevent self-loosening under vibration while the washer spreads the clamping load and helps protect the mating surface.
€1.10
New5 in stockincl. VAT
ALR7188 is a bonnet stay support bracket that secures the bonnet stay to the vehicle body. It provides the fixed mounting point for bonnet stay ALR7187 on Defender models and ensures the bonnet stay can hold the bonnet open safely when the vehicle is being worked on.
€29.99
NewLast oneincl. VAT
K3dparts Pro Locator
