Jaguar Transmission & Drivetrain parts

Genuine Jaguar, Land Rover, washer 1 Pcs Nr: TYF101040

incl. VAT

Genuine Jaguar, Land Rover, ring 1 Pcs No: TDL500080

An output shaft snap ring for the MT82 manual transmission. It secures and retains the output shaft components inside the MT82 gearbox to prevent axial movement.

incl. VAT

Jaguar, Land Rover, genuine propshaft bolt 7 pcs No: LR045409

A 3/8 inch UNF propeller shaft bolt. Fitted to both front and rear propeller shafts, this bolt secures the shaft flanges together to retain the propshaft. Commonly referred to as a propshaft bolt, it uses a 3/8" UNF thread and is fitted to a range of Land Rover models

incl. VAT

Genuine Jaguar, Land Rover, screw 3 Pcs Nr: FS106167L

M6 x 16mm flanged head set screw. It is supplied for general-purpose use across multiple Land Rover models where a metric flange-head screw is specified to secure assemblies.

incl. VAT

Genuine Jaguar, Land Rover, washer 1 Pcs No: TUF100090

Selector Mechanism External (1.8 K16 Petrol,2.0L I4 8V TCIE,Manual Transmission)

incl. VAT

Jaguar, Land Rover, genuine bolt 1pcs No: UYG500050

M10 double hex-head bolt used on the swivel housing. It secures the oil seal retainer to the swivel housing and should be inspected for corrosion, thread damage or distortion whenever the swivel housing or drive shafts are serviced.

incl. VAT

Genuine Jaguar, Land Rover, bolt 1 Pcs Nr: T4A10922

Front Differential Drive Unit (All Wheel Drive)

incl. VAT

Genuine Jaguar, Land Rover, bolt 1 Pcs No: LR039049

Hex-headed bolt used to fasten components on front axle cases, transmission mountings and rear cross members across multiple Land Rover models. It provides the clamping required to secure these structural and drivetrain assemblies; when fitting, ensure mating faces and threads are clean and the correct fastener specification and torque from the vehicle repair manual are used. Inspect the bolt for corrosion, thread damage or distortion and replace if any defects are found.

incl. VAT