29 Engine / Fuel system parts for Jaguar from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
LR013275 is a glow plug fitted into each cylinder's combustion chamber on 3.0 V6 diesel and 4.4 diesel V8 engines to heat the intake air and assist engine starting.
€39.90
New2 in stockincl. VAT
Jaguar Hexagonal head bolt for the Fuel Injector Pump And Pipes.
€2.80
New3 in stockincl. VAT
NRC6097 is a fuel tank mounting bracket that secures the vehicle's fuel tank to the chassis. It is used on Defender and Range Rover Classic models and forms part of the fuel tank pump and mountings assembly.
€7.99
New4 in stockincl. VAT
LR022300 is a glow plug for the 2.2L diesel engine. Fitted into the combustion chamber, it provides heat during cold-start conditions to aid ignition and improve starting reliability on 2.2L diesel engines.
€39.78
New4 in stockincl. VAT
LR019118 is a leak-off pipe O-ring. Fitted to the fuel injector leak-off pipe, it seals the injector return path on applicable 2.2 Puma, 2.7 TDV6 and 3.6 TDV8 diesel engines.
€3.20
New11 in stockincl. VAT
AAU9903 is the upper sealing O-ring used on diesel fuel filter/sedimentor assemblies. Fitted at the filter head, it provides the upper seal and prevents fuel leaking from the top of the filter housing.
€3.55
New9 in stockincl. VAT
LR079272 is a retaining ring used within the fuel tank and related assemblies. Fitted in the fuel system, it secures and locates components to maintain correct position and ensure assembly integrity on specified Range Rover and Range Rover Sport models.
€83.40
NewLast oneincl. VAT
LR004469 is a high-pressure rigid fuel pipe that connects the fuel rail to injector number 4 on 2.4 Puma diesel engines. Fitted to the outermost right-hand injector, this pipe forms part of the HPCR (High Pressure Common Rail) fuel injector pipework and provides a sealed, rigid route for high-pressure diesel between the rail and the injector.
€56.08
NewLast oneincl. VAT
ARA1502L is a fuel tank sender unit seal fitted at the sender unit opening to form a fuel-tight barrier.
€3.50
New7 in stockincl. VAT
LR017437 is a fuel injector kit for cylinders 2, 5 and 6 on 3.0 V6 diesel engines. The kit includes a delivery tube, washer clamp and O-rings for fitting to the fuel injection rail. The components are intended to renew the feed and sealing parts for those injectors to restore a secure connection to the fuel rail.
€107.10
New2 in stockincl. VAT
AAU9902 is a lower diesel fuel filter seal. Fitted to the lower seal on diesel fuel filters and sedimentors, it provides the sealing element at the base of the filter assembly.
€3.99
New19 in stockincl. VAT
WDN500110 is a central Exhaust Gas Temperature Sensor. Fitted to the exhaust system and commonly referred to as an EGTS, this sensor monitors exhaust gas temperature on 2.7 TDV6 and 3.0D V6 diesel engines, typically where a diesel particulate filter is fitted.
€140.70
NewLast oneincl. VAT
K3dparts Pro Locator
